Toshiba e-Studio332s, Руководство оператора

Страница: 75 / 183

Configuring the Network Settings
- 75 -
Setup
1
12
Enter the information in C-2.
Note
z
If domain management is performed, enter "C-
2@domain name".
z
When carrying out domain management, if you cannot
connect even after entering "C-2@Domainname",
delete "@Domainname".
Access the machine's website again, and set the
NetBIOS domain name in [
Workgroup name ] within
[ Admin Setup ] > [ Network Menu ] > [ NBT/
NetBEUI ].
*For the domain name, please check with the network
manager.
13
Select [ Enter ] and then press .
14
Press the to select [ Password ] and
then press .
15
Enter the value of C-3.
16
Select [ Enter ] and then press .
17
Press the to select [ File Name ] and
then press .
18
Enter the information in C-6.
- By adding "#n" to the end of the file name, a
serial number is automatically assigned to the end
of the name of sent files.
- By adding "#d" to the end of the file name, a date
is automatically assigned to the end of the name
of sent files.
19
Select [ Enter ] and then press .
20
Configure other items if necessary.
21
Press to register the settings.
The setup for Scan To Network PC is complete.
Reference
z
For details how to use Scan To Network PC, refer to "Scan
to Network PC" P. 107 .
Managing Profiles
To perform the Scan To Network PC, Auto Deliver
or Transmission Data Save function (for
e-STUDIO403S Only), a profile for each
destination must be created. You can register up
to 50 profiles.
Reference
z
Refer to "Creating a Profile for Scan To Network PC" P. 74
Modifying a Profile
1
Press the < SETTING > key on the
operator panel.
2
Press the to select [ Profile ] and then
press .
3
Press the to select the profile you
want to modify and then press .
4
Press the to select [ Edit ] and then
press .
5
Press the to select the item you want
to modify and then press .
6
Modify the item.
7
Select [ Enter ] and then press .
8
If you want to modify more than one
item, repeat steps 5 and 7.
9
Press to register the settings.
Deleting a Profile
1
Press the < SETTING > key on the
operator panel.
2
Press the to select [ Profile ] and then
press .
3
Press the to select the profile you
want to delete and then press .
4
Press the to select [ Delete ] and then
press .
5
Press the or to select [ Yes ] on the
confirmation message and then press .
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK