Printing From USB Memory
- 120 -
11
Remove the USB memory from the port
after a message is displayed indicating
that it is OK to remove the USB memory.
Configuring Print Settings
You can configure the settings for printing from
USB memory on the [
Print Setup
] menu.
Perform the following procedure at step 9 of
"Printing From USB Memory" on P. 119
in
.
Changing the Paper Type (Paper
Feed)
You can select the paper source.
Note
z
When printing a PRN file, the setting of the paper tray
follows the driver settings at the time of file creation.
1
Press the to select [
Print Setup
] and
then press .
2
Check that [
Paper Feed
] is selected and
then press .
3
Press the to select the desired value
and then press .
4
Press the to return to the start screen.
Memo
z
[
Tray 2
] is displayed only when the second tray unit is
installed as an option.
Changing the Number of Copies
(Copies)
You can set the number of copies to print.
1
Press the to select [
Print Setup
] and
then press .
2
Press the to select [
Copies
] and then
press .
3
Enter a number of copies and then press .
You can enter 1 to 999.
4
Press the to return to the start screen.
Doing Duplex Printing (Duplex)
You can make 1-sided (simplex) or 2-sided
(duplex) printouts.
Note
z
When printing a PRN file, setting of double-sided printing
follows the driver settings at the time of file creation.
1
Press the to select [
Print Setup
] and
then press .
2
Press the to select [
Duplex
] and then
press .
3
Press the to select [
ON
] for duplex
printing or [
OFF
] for simplex printing
and then press .
4
Press the to return to the start screen.
Setting the Binding Position (Binding)
You can select the binding position of duplex
printouts.
1
Press the to select [
Print Setup
] and
then press .
2
Press the to select [
Binding
] and
then press .
3
Press the to select [
Long edge bind
]
to bind at the long edge of the paper or
[
Short edge bind
] to bind at the short
edge of the paper and then press .
4
Press the to return to the start screen.
Reference
z
For details on long edge binding and short edge binding,
refer to
"Making Duplex Copies (Duplex Copy)" on P. 80
Fitting Pages (Fit)
You can match the page size to the paper size
when printing.
If the page size of a file to print is larger or
smaller than the effective print area, the page
size is resized to fit the paper size.
Note
z
When printing a PRN file, these settings do not work.
Memo
z
This function is set to [
ON
] by default.
1
Press the to select [
Print Setup
] and
then press .
Selectable Paper Tray Values:
Tray 1* Tray 2 MP Tray
*indicates the factory default.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Содержание e-Studio332s
Страница 1: ...MULTIFUNCTIONAL DIGITAL SYSTEMS User s Manual Basic ...
Страница 182: ...DP 3321S 4030S OME12009800 ...
