Toshiba e-Studio2505, Руководство пользователя

Страница: 94 / 116

6 TROUBLESHOOTING
92 When This Message Appears
When This Message Appears
A message appears when a problem occurs on the equipment. Find the message on the list below and follow the
instructions in the Countermeasure.
Message Meaning Countermeasure
MISFEED xxx An original or a sheet of copy paper is
misfed. An error code “xxx” and a
message for solving the problem are
displayed. Remove any misfed paper.
P.93 “Paper Misfeed”
CLOSE *** Any cover of the equipment indicated
by “***” is not securely closed. Close the cover securely.
DRAWER * EMPTY The paper in a drawer indicated by “*”
has run out. Load paper in the drawer.
P.17 “Loading paper in the drawer”
COUNT OVER The number of pages scanned has
exceeded the maximum value. Select “PRINT” on the LCD screen to copy the data scanned
so far. Select “CANCEL JOB” to delete all the data scanned so
far.
CALL FOR SERVICE The repair or adjustment by your
service technician is needed. Contact your service representative.
Give the service technician the error code (consisting of
letters and numbers) that appears in the upper right area of
the LCD screen.
Never attempt to repair, disassemble or modify the
equipment by yourself.
This could cause an electric shock, a fire or serious injury.
Contact your service representative when the equipment is in
an abnormal condition or any malfunction is found.
TIME FOR MAINTENANCE The maintenance by your service
technician is needed. Contact your service representative.
BYPASS EMPTY Paper set on the bypass tray has run
out. Load paper on the bypass tray.
P.19 “Loading paper on the bypass tray”
TONER IS LOW There is only a little toner remaining in
the toner cartridge. There is still a little toner remaining in the toner cartridge. Do
not replace the toner cartridge until “TONER EMPTY” appears
on the LCD screen.
y The message may not appear because the toner
remaining in the cartridge does not lie evenly.
y When the message appears, it is advisable to
purchase a new recommended cartridge to prepare
for its replacement.
ERROR : TONER The toner cartridge is not installed
correctly. Install the toner cartridge correctly.
The recommended toner cartridge is
not being used. If you are using a toner cartridge other than the one we
recommend, the equipment may not be able to detect whether
it is installed or not. For details of the recommended toner
cartridge, refer to the
Safety Information .
TONER EMPTY The toner in the toner cartridge has
run out. Replace the toner cartridge with a new one.
P.98 “Replacing Toner Cartridge”
MEMORY IS FULL The built-in memory of the equipment
has become full. Select “PRINT” on the LCD screen to copy the data scanned
so far. Select “CANCEL JOB” to delete all the data scanned so
far.
CLEAR PAPER OUTPUT
TRAY:
PRESS START KEY Approx. maximum sheets of paper
have continuously exited and the
equipment stops copying to prevent
the copied paper from overflowing
from the tray. Remove the paper from the receiving tray, and then press
[START] to resume copying.
Press [CLEAR/STOP] to end the copy. When “MEMORY
CLEAR?” appears on the LCD screen, select “YES”, and then
press [START].