Toshiba e-studio2309a, Руководство пользователя

Страница: 44 / 236

2 COPY FUNCTIONS
42 Basic Copy Procedure
If originals remain on the Reversing Automatic Document Feeder after pressing [FINISHED] on the
CONTINUE SCAN screen, remove all the originals. Leaving them may cause a paper jam.
When the copying has finished, press [FUNCTION CLEAR] to clear the set copy functions and return to
the main screen (Copy).
 If the paper source runs out of paper, an error message is displayed on the LCD screen and copying
stops. Load paper. The equipment automatically resumes copying after approx. 3 seconds have
passed.
 The receiving tray can hold up to 100 sheets. If the excessive paper error occurs, the lamp blinks and
an error message is displayed on the LCD screen. Remove the paper from the tray and press [START]
to resume copying.
 When you use overhead transparencies, remove them one by one every time they are ejected.
Otherwise, they could be curled and not be good for projection.
 Shortcut keys
You can access some functions by simply pressing the and button.
 P.42 “Using the “EXPOSURE” or “ID CARD” function quickly”
 P.44 “Selecting “ORIGINAL MODE” quickly”
Using the “EXPOSURE” or “ID CARD” function quickly
On the first screen of Copy mode, the button function varies depending on the region. It can work as the
[EXPOSURE] button for Europe and the Americas, or the [ID CARD] button for regions other than Europe and
the Americas. Just press the button to access the “EXPOSURE” or “ID CARD” function so that you can
change the copy density, or you can copy the front and back of a card on a sheet of paper.
 P.45 “Adjusting the exposure”
 P.58 “Copying both sides of a card on a sheet”
For Europe and the Americas
AUTO EXPOSURE
TEXT/PHOTO
A4
1
READY
100%
EXPOSURE
AUTO