Toshiba e-STUDIO 520, Руководство по печати, Страница: 286 / 420

5 Printing from Windows
286 Printing with Extended Print Functionality
y Unit
Select the unit for the Tab Extension and Image Shift option. The default unit varies
depending on the regional setting of the client computer.
y The tab paper cannot be fed from LCF (not available for some countries or regions),
External LCF, and Inserter Unit.
y When you place the tab paper on the drawer, make sure the tab side of the paper
becomes left side.
y When you place the tab paper on the Bypass Tray, make sure the tab side of the
paper becomes outside.
y If the document for tab printing is not created properly or the Image Shift Width is not
set properly, the image will not be printed in the correct position within the tab exten-
sion. Please make sure to create the document and set the Image Shift Width cor-
rectly.
y If mis-printing occurs while multiple tab pages are printed continuously, dirt may
adhere to the reverse side of a paper. To avoid this, it is recommended to print a tab
paper as a separated job for each page so that this equipment performs cleaning
before printing next tab paper.
6
Set any other print options you require and click [OK].
7
Click [OK] or [Print] to send the print job.
y A front cover and back cover are printed or inserted for output.
Interleaving Pages
This feature is useful when you want to insert paper of a different type, or from another source,
between every page of your print job. For example, you could use this option to insert blank,
colored sheets between overhead transparencies.
Interleaving pages can also be enabled for N-up printing by setting it in the Multiple Pages per
Sheet window.
P.291 “Printing Several Reduced Pages per Sheet”
Place the tab paper
so that the tab side
becomes left side.
Place the tab paper
so that the tab side
becomes outside.