Toshiba e-STUDIO 4511 Скачать руководство пользователя страница 160

Страница: 160 / 313

158

7.SCANNING THE IMAGES

4.SCAN TO E-MAIL (Cont.)

Set the size of the attached data.

- Image data are divided into some small blocks to be sent.

FRAGMENT MESSAGE SIZE (KB): NONE, 64 KB, 128 KB, 256

KB, 512 KB, 1024 KB, 2048 KB
Press the [Next] or [Prev] button to switch the screen and make

necessary settings.

The volume of the high-resolution image data may be very large.
When sending E-mail, be careful not to exceed the mail server

capacity of both the transmitter and the receiver.

- If the software for E-mail is not able to divide the data properly,

resend it after setting smaller fragment message size.

- If the data size exceeds the specified size, it is divided into the

specified size to be sent.

- If the E-mail receiver uses a different controller and the attached

file is PDF format, the attached file can not be printed.

Press the [FROM ADDRESS] button to
enter the sender's address, and then
press the [ENTER] button.

- Entering Letters "3.ENTERING LETTERS"

Page 141

Press the [FROM NAME] button to enter
the sender's name, and then press the
[ENTER] button.

- Entering Letters "3.ENTERING LETTERS"

Page 141

Содержание e-STUDIO 4511


























































































































































































































































































































Результаты поиска

Содержание e-STUDIO 4511

Отзывы:

Toshiba e-STUDIO 4511, Руководство оператора, Страница: 160 / 313

Результаты поиска

Содержание e-STUDIO 4511

Отзывы: