background image

AS/400 Print Solution — Trademarks and Copyright

5

Trademarks and Copyright

Trademarks

Copyright permissions regarding screenshots, pictures and descriptions, included in 
this document, can be obtained from AXIS Communications AB.

AXIS Communications, AXIS 5570e, AXIS 5570e IPDS SNA and design (the AXIS 
logo) are either registered trademarks or trademarks of AXIS AB and AXIS Commu-
nications AB in Sweden, the European Union, the United States, Japan and other 
countries.
All "AXIS 5570e" described henceforth means "AXIS 5570e IPDS SNA".

AS/400 is a registered trademark of US International Business Machines Corpora-
tion.

Other company names and product names in this manual are the trademarks of 
their respective companies.

Copyright

© 2006 - 2010 TOSHIBA TEC CORPORATION All rights reserved
This manual is protected by copyright laws. No part of this manual shall be duplicated or repro-
duced without the permission of TOSHIBA TEC CORPORATION. TOSHIBA TEC CORPORATION 
shall not be liable in terms of granting patents for any use of information contained in this manual 
by third parties.

Содержание e-Studio 283





















































Отзывы: