Toshiba E-studio 2050c Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 228

Toshiba E-studio 2050c Скачать руководство пользователя страница 68

3 BASIC COPY MODES

66 Paper Selection

Paper Selection

Automatic Paper Selection (APS)

This equipment detects the size of an original and selects paper of the same size automatically. This function
is called Automatic Paper Selection (APS). Automatic size detection for originals on the original glass is
available only for e-STUDIO2550C Series / e-STUDIO5055C Series.

y

For the original sizes detectable, see the following page:

P.33 “Acceptable originals”

y

Some original sizes may not be detected with this function. In this case, select the desired size
manually.

P.67 “Selecting desired paper manually”

1

Place paper in the drawer(s).

2

Place the original(s).

3

Press [APS] on the touch panel.

The paper selection mode is now set at Automatic Paper Selection.

y

The paper selection mode is set at Automatic Paper Selection by default.

y

Even if the direction of the paper placed in the selected drawer differs from that of the original,
this equipment rotates the data of the original by 90 degrees to make copies as long as their
sizes are the same. (This works on A4, B5 or LT paper only.) For example, when an A4 original is
placed in a portrait direction and A4-R paper is placed in the drawer, the data of the A4 original
will be rotated and copied correctly on A4-R paper.

If “Change direction of original” or “CHANGE DRAWER TO CORRECT PAPER SIZE” appears,
follow the directions.

4

Select other copy modes as required, and then press the [START] button on the control
panel.

«
...
66
67
68
69
70
...
»

Содержание E-studio 2050c





































































































































































































































Отзывы:

Нет отзывов