76
SPECIAL FUNCTIONS
Adding a original to polling memory:
Use this procedure to add an original to another
original that has already been scanned into polling
memory. Place the original in the ADF/RADF or on the
document glass and follow the steps below.
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "7:MEMORY POLL MODE"
appears, and then press the [ENTER]
key.
3
Press the [
] key (
) or [
] key (
)
until "1:SET" appears, and then press
the [ENTER] key.
4
Press the [
] key (
) or [
] key (
)
to select the number of times polling
transmission will take place and press
the [ENTER] key.
"1:1 TIME" or
"2:REPEAT" can be
selected as the number
of polling operations
allowed.
5
Press the [START] key (
).
Deleting originals from polling memory:
Follow the steps below to delete originals that have
been scanned into polling memory.
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "7:MEMORY POLL MODE"
appears, and then press the [ENTER]
key.
3
Press the [
] key (
) or [
] key (
)
until "2:CLEAR" appears, and then
press the [ENTER] key.
4
Press the [START] key.
"7:MEMORY POLL MODE"
Selection
"1:SET"
Selection
"7:MEMORY POLL MODE"
Selection
"2:CLEAR"
Selection
