Toshiba e-studio 1101 Скачать руководство пользователя страница 222

Страница: 222 / 230

Appendix

202

• If you combine this function with the Duplex (Top to Top) function and se-

lect

[

P1,P2...

]

[

1/5,2/5...

]

, page numbers on the back are printed as follows:

Front

Back

❖

Stamp Text

Certain stamp positions can cause text to disappear.

❖

Front Cover, Front/Back Cover

• If Blank mode is selected, the cover is not be counted as a copy.
• Front and back covers are two-sided copied depending on the settings

made in Display Time in Cover Sheet Tray of User Tools (System Settings).
• At Mode Selected… Depends on the setting done from Cover Sheet

Tray.

• Full Time… Depends on the setting done from Paper Type.

See “Tray Paper Settings”, General Settings Guide.

❖

Designate

• When

[

Combine (1 Sided

→

2 Sided)

]

has been selected, specified pages will al-

ways be copied on the front of copies, as in Chapters mode.

• In “Tray Paper Settings”, if you selected

[

At Mode Selected

]

for

[

Display Time

]

the machine refers to the settings in “Tray Paper Settings” to ascertain
whether the front and back covers are copied one-sided or two-sided. If
you selected

[

Full Time

]

for

[

Display Time

]

, the machine refers to the settings

in “Paper Type” to ascertain whether the front and back covers are copied
one-sided or two-sided. See “Tray Paper Settings”, General Settings
Guide.

• If Blank mode is selected, the designate sheet is not counted as a copy.

❖

Slip sheet

• Tab stock are possible to use as slip sheets.
• If you do not copy onto slip sheets, they are excluded from the number of

copies counted.

GCSTMPBE

Содержание e-studio 1101







































































































































































































































Результаты поиска

Содержание e-studio 1101

Отзывы:

Toshiba e-studio 1101, Руководство оператора, Страница: 222 / 230

Результаты поиска

Содержание e-studio 1101

Отзывы: