User’s Manual
EN-17
dynadock
TM
WiAC
Component
Description
LAN jack
(10/100/1000 BASE-
TX Ethernet)
This jack lets you connect to a LAN via a network
cable (not provided). Connect one end of a network
cable to the Ethernet port (RJ-45) on the dynadock
and the other end to your network for high
performance network access. To configure the
network properties of the Ethernet adaptor:
In Windows 8.1, move the mouse pointer and click
icon in the lower-left corner of the screen to get
to the
Apps view
, and then click
Control Panel
->
Network and Internet
->
View network status
and tasks
->
Change adapter settings
.
In Windows
®
7, select
Start
->
Control Panel
->
Network and Internet
->
View network status
and tasks
->
Change adapter settings
.
In the Network Connections folder, double-click the
connection icon for the Ethernet adaptor of the
dynadock, which is indicated by dynadock
Ethernet. This opens the Local Area Connection
Properties window for you to configure the network
settings as required according to your network
environment. If you are unsure about the settings,
consult your network administrator for assistance.
■
The LAN jack does not support wake-up on LAN.
■
The Local Area Connection icon in the System Tray/Notification Area
does not show a connection. Open “Network Connections” to view the
Ethernet Connection.
Component
Description
USB upstream
connector
It connects the dynadock to the computer (type B
to type A cable provided).
Universal Serial Bus
(USB 3.0) ports
Two Universal Serial Bus ports, which comply to
the USB 3.0 standard, are provided on the back
panel of the dynadock.
These two ports connect the selected
USB peripherals.
The USB 3.0 port is compliant with USB 3.0
standard and backward compatible with USB 2.0
devices.