Toshiba DWS-22AHK, Инструкция по эксплуатации

Страница: 10 / 29

Add water to the dishwasher tank
Turn on the dishwasher by pressing ON/OFF button. Open the tank lid and add water to the
dishwasher tank.
There are two ways to indicate that the tank is full
1. Before starting:
When the tank is full, it will beep.
2. After starting:
If the water is sufficient, the indicator still lights up, please contact qualified repairman for help.
Or
Way 1: By hands
Way 2: By automatically
Water Inlet Drain Pipe
Water tap
Inlet pipe
Note: If the water is insufficient in 3 minutes, the indicator will be flicking and machine will
beep every 1 minute, please check as below:
1. Checking the water tap is opened in automatically adding water way, if so, you should
open the water tap and press button to active the machine again.
2. If there is enough water in water tank, please contact qualified repairman for help.
10
In the first minute after switch on the power, press the button of “Intensive” and
“Rapid” together to switch the water inlet mode from “By hand” to “By automatically”.
By automatically
By hands
3.
或
水龍頭
進水口
排水管
進水管