Toshiba DST-3000, Руководство пользователя

Страница: 73 / 98

DST-3000 Receiver’s Menu System
Page 7-11
Tag Boxes
The four columns of small boxes on the right hand side of the CHANNEL LISTS screen are the
Tag Boxes. The first three columns are the lists traditionally known as Fav. A, Fav. B, and Fav. C .
The fourth column is the Family list.
In the CHANNEL LISTS screen, use the , , , and keys to highlight the button that
corresponds to the channel number and list that you wish to change. Press the key to add
or remove the check mark, which indicates that the channel in that row is included in the list
shown at the top of the column.
To help you decide whether to include or exclude a certain channel, the title of the currently
airing program for that channel will appear at the top of the screen.
Locking is described in the subsection “Lock/Unlock” later in this chapter. When the system is
locked, the passcode will be needed to modify the settings of the channel lists.
MyLogos™
Highlighting the MyLogos button on the SETUP
screen and pressing the key on the remote
control displays the MYLOGOS SETUP screen
shown to the right.
On the left are buttons for Done and Video, which are
explained below.
Done
Highlighting the Done button on the screen and
pressing the key on the remote control causes
an exit from the MYLOGOS SETUP screen and a
return to the SETUP screen.
Video
Highlighting the Video button on the screen and pressing the key on the remote control
will return you to the last program you were viewing.
The MYLOGOS SETUP screen is used to specify which nine channels will appear in the
MyLogos pop-up panel that displays when is pressed.
Set Channel
Using the , , , and keys, highlight one of the nine channel boxes. You can enter the desired
channel using the number keys on the remote control or by using the
and keys. Pressing
while highlighting one of the channel boxes will also initiate a pop-up panel that will
allow you to set the channel using the and keys on the remote control or the DST-3000
receiver’s front panel.
Installation
Highlighting the Installation button on the SETUP screen takes you to the INSTALLATION
screen, which contains utilities to facilitate installation of your satellite dish antenna. You can
also evaluate your system’s signal strength via the
INSTALLATION screen. This screen was
discussed in detail in Chapter 4, “Setting Up the Satellite Dish Antenna and Terrestrial Inputs.”
▲
▲
▲
▲
SELECT
The MyLogos™ setup screen
SELECT
SELECT
SELECT
SELECT
▲
▲
▲
▲
SELECT
▲
▲