Toshiba DP-5550, Руководство по обслуживанию, Страница: 110 / 404

e-STUDIO555/655/755/855 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
CONTROL PANEL
5 - 4
23 READY
(FINISHER IN USE)
Finisher manual operating
• The equipment is ready for
scanning and waiting for the
operator to select the copying
conditions.
Printing is started when pressing the
[START] button.
24 READY
(ADD TAB SHEET)
No tab paper
• The equipment is ready for
scanning and waiting for the
operator to select the copying
conditions.
Printing is resumed when the
[START] button is pressed under the
condition the printing UI is displayed
([JOB STATUS] button pressed)
after adding tab paper.
25 Ready for bypass feeding Paper is set on the bypass tray
26 COPYING At the copying state
27 Auto Start Auto Start is set during printing Cleared by pressing [FUNCTION
CLEAR] button
28 Place Doc. Feeder in the
down position
RADF is open when original is placed
on RADF
Cleared by closing RADF
29 Place originals in the
document feeder
Displayed when the conditions are set
and [START] button is pressed with
no original placed
Cleared by setting the original
30 Change direction of original Displayed when the direction of
original placed is different from the
setting
31 PRESS [BASIC] and select
normal paper size
Displays the warning that the copy is
not enabled when any drawer but
bypass feed is selected at Cover
Sheet Copying Mode or Sheet
Insertion Mode
32 Place last %d originals in
doc.
feeder entrance tray
Paper jam occurred during copying
(RADF scanning)
33 Add paper Displayed when the paper in selected
drawer is running out
34 Cannot duplex this size Displayed when the paper size which
is not specified for duplex copying is
set
35 Cannot use this media type Displayed when the paper size which
is not specified for the functions such
as stapling or hole punching is set
36 Set standard size Displayed when the paper size which
is not acceptable is set (depends on
the setting)
Re-set the paper size
37 Cannot staple this paper
type
Displayed when the paper type which
can not be stapled is set at Cover
Sheet Copying Mode/Sheet Insertion
Mode
Re-set the paper type
38 Cannot duplex this size Displayed when the paper size which
is not specified for duplex copying is
set
39 Cannot use transparency
film
Displayed when the paper type which
can not be punched is set at Cover
Sheet Copying Mode/Sheet Insertion
Mode
Re-set the paper type
40 Copy size: A4/LT only Displayed when the paper size which
is not specified for “Book-type duplex
copying” or “Dual-page” is set
41 Copy size: A4/LT and A4-
R/LT-R
Displayed when the paper size which
is not specified for “Rotate Sort”
42 CHANGE DRAWER TO
CORRECT PAPER SIZE
Displayed when the selected paper
size is not in the drawer
43 Change drawer to correct
media type
Displayed when the selected media
type is not in the drawer
No. Message State of equipment Note