Toshiba DIGITAL Series, Руководство по установке программного обеспечения

Страница: 91 / 238

3.INSTALLING PRINTER DRIVERS FOR WINDOWS
Other Installations 89
3 INSTALLING PRINTER DRIVERS FOR WINDOWS

USB printing
This section describes how to set up the printer drivers when this equipment is connected with a USB cable
on Windows Vista / Windows 7 / Windows 8 / Windows Server 2003 / Windows Server 2008 / Windows Server
2012.
The procedure to install the printer driver for USB printing differs depending on the version of Windows used.
 P.89 “Windows 7 / Windows 8 / Windows Server 2012”
 P.93 “Windows Vista / Windows Server 2008”
 P.96 “Windows Server 2003”
 Use a USB2.0 Hi-Speed certified cable: USB cable supporting the USB2.0 Hi-Speed mode (480 Mbps
of transfer speed) certified by the USB Implementers Forum.
 Connect the equipment with a PC directly by the USB cable. When it is connected with a PC via a USB
hub, the equipment may not be recognized.
 If a PCLX error occurs, open [Printer properties] of TOSHIBA Universal Printer2 in [Devices and
Printers] and select the [Start printing after last page is spooled] check box in the [Advanced] tab.
 Windows 7 / Windows 8 / Windows Server 2012
You can install a printer driver for USB printing in Windows 7 / Windows 8 / Windows Server 2012 by using
Software Installer contained in the Install Disc.
 To perform installation, you must log onto Windows with the “Administrator” account. However, even if
you have logged on with a user account other than “Administrator”, entering an administrator password
upon display of the [User Account Control] dialog box enables you to perform the installation by
temporarily changing the user account.
 Even when you have logged on Windows with the “Administrator” account, the [User Account Control]
dialog box may appear. In this case, click a button for allowing the operation, such as [Continue], and
then continue.
1
Power on this equipment and your computer.
2
Connect the USB cable to this equipment and your computer.
3
Insert the Install Disc into the disc drive.
If Software Installer does not automatically start, use the Explorer to open the “e-STUDIO” folder in the
Install Disc and double-click “Setup.exe”.
4
Select [I agree to the terms of the License Agreement.] and click [Next].
 To change the display language, select a desired language from the [Select Language] box.
 The main menu is displayed.