Toshiba D-VR610KU, Руководство по обслуживанию

Страница: 14 / 87

1-6-2 E9KGADC
Reference Notes
CAUTION 1: Locking Tabs (L-1) and (L-2) are fragile.
Be careful not to break them.
1-1. Release five Locking Tabs (L-1).
1-2. Release three Locking Tabs (L-2).
1-3. Disconnect Connector (CN1231), and remove
the Panel Front.
2. When reassembling, solder wire jumpers as shown
in Fig. D9.
3. Before installing the Deck Assembly, be sure to
place the pin of LD-SW on BOARD Main as shown
in Fig. D9. Then, install the Deck Assembly while
aligning the hole of Cam Gear with the pin of LD-
SW, the shaft of Cam Gear with the hole of LD-SW
as shown in Fig. D9.
4. The DVD Mechanism & DVD Main BOARD
Assembly is adjusted as a unit at factory.
Therefore, do not disassemble it.
Replace the DVD Mechanism & DVD Main
BOARD Assembly as a unit.
(S-1)
(S-1)
(S-1)
[1] Cover Top
Fig. D1
(L-1)
(S-3)
(S-3)
(S-4)
(S-2)
(L-2)
(L-1)
(L-1)
[2] Panel
Front
[3] Front
Bracket
CN1231
Fig. D2
Fig. D3
(S-5)
Jack Plate Earth
[4] Jack Bracket
[5] BOARD
Front Jack
(S-7)
Fig. D4
(S-6)
(S-6)
(S-6a) Mecha Plate
Earth R
CN101
Hook
CN701
CN901
(S-6)
[7] Dust
Cover
*
See Reference Notes 4.
[6]
*
DVD
Mechanism
&
DVD Main
BOARD
Assembly