44
EN
44
EN
SATELLITE LINK
5
Press [ENTER].
“To Standby Mode” is highlighted.
6
Press [ENTER] again.
Satellite Link
Start Mode
12:00 AM XP
To Standby Mode
In a second, the unit will be turned off
automatically as it goes into the satellite link
standby mode.
To cancel the satellite link function while in
the satellite link standby mode:
Press
[I/
y
y
ON/STANDBY]
to turn on the unit.
To cancel the satellite link function while the
satellite link recording is in progress:
Press
[STOP
C
]
on the front panel of the unit.
Note
• If the signal of external input breaks up over 5 seconds, satellite link function will be canceled.
• If you have not set the clock, “Clock Setting” menu will appear at step 1. Follow to step 3 in “CLOCK SETTING” on
page 25.
• You cannot set the end time for the satellite link timer recording on this unit.
• Recording picture will be distorted if the copy protection signal is being detected during satellite link timer
recording.
• You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 41 for more
information.
• Press
[TIMER PROG.]
during the satellite link timer recording to check the satellite link timer recording in
progress.
• When a regular timer recording and the satellite link timer recording are overlapped, those recordings are
recorded as illustrated below.
example 2
actual
recording
timer
recording
satellite link
example 3
actual
recording
timer
recording
satellite link
The first 2 minutes (at the longest) will be cut off.
example 1
timer
recording
actual
recording
satellite link
The first 2 minutes (at the longest) will be cut off.
E7E7AUD̲EN.indb 44
E7E7AUD̲EN.indb 44
2007/01/29 19:04:00
2007/01/29 19:04:00
