110
Editing
DV Recording (Recording from a digital video camera) (Continued)
Notes
• The DV terminal of this recorder supports only input from a
DV format digital video camera. It cannot output to a
connected device. Some models of DV format digital video
cameras may be not compatible.
• At step 5, you can enlarge a thumbnail by selecting “Full
Display”, then pressing the ENTER button.
• If “DV Chapter Create” is set to “Off” and you record onto a
DVD-R/RW disc, chapters are automatically made
according to the “DVD-Video: CHP Create” setting
(
page 130). The number of chapters has the limit.
Chapters are divided with a margin of about 0.5 second or
less according to the DVD-Video standard.
• DV recording does not start in the following cases:
- While recording or in the time slip mode.
- While operating a REC MENU, CONTENT MENU or
LIBRARY MENU.
- If the recorder’s clock is not set yet.
- Within 5 minutes before a programmed recording starts, or
during a programmed recording is being executed.
• If a DV recording overlaps with a programmed recording,
the DV recording will stop 5 minutes before the
programmed recording starts, and the programmed
recording will be executed.
• DV recording does not work if the DV terminal is connected
equipment other than DV format digital video camera, such
as a PC.
• Depending on the connected DV format digital video
camera, the display at step 5 may not show “Manufacturer”
or “Equipment”.
• If the DV terminal is connected more than one DV format
digital video camera, DV recording may not work properly.
For proper functioning of DV recording, connect only one
device to the DV terminal.
• Keep the DV terminal not connected unless you record
from a DV format digital video camera, as it may give
influence on the recorder if operated.
• If you start a recording and do not operate for about 15
minutes, the display switches to the full mode, when
“Screen Protector” (
page 127) is set to “On.” Pressing
the ENTER button while “Detail Display” is selected can
restore the previous display.
• “DV Chapter Create” is not available when recording to a
DVD-RAM disc.
• To record stereo sound from the connected DV format
digital video camera, connect it to the INPUT 1 jacks using
compatible cables such as supplied audio/video cables.
• To record stereo sound from the connected DV format
digital video camera, connect it to the input jacks using
compatible cables such as supplied audio and video
cables. (
page 36)
• If a DV format digital video camera is not recognized, pull
out the plug and connect it again.
• Some models of DV format digital video cameras may
support a different compression format. From such
equipment, recording is not possible.
• Depending on the models of DV format digital video
cameras, recording may not work properly or some
functions may be disabled.
• On an input source from a DV tape which is partly recorded
over, “DV Chapter Create” may not work properly.
Содержание D-R1
