5
The display will show a flashing “
READING
”, then the total number of tracks would be shown
and the playback will start from track.
5. To remove the CD, press STOP button on unit or on remote control to turn off the unit,
then press the PUSH TO OPEN button to open the CD compartment lid. Hold the CD by its
edges, and take it out carefully.
Note:
1. Make sure the disc is stopped before opening the CD DOOR.
2. To ensure good system performance; wait until the unit completely reads the disc before
proceeding.
3. If no disc loaded into the tray, or the disc is unreadable, the display will show “
NO DISC
”.
PLAYING A DISC
1. The playback starts from track 1 automatically when reading the disc.
To pause playback, press / PAIR button on unit or key on remote control. The
current playing time will flash on the display.
To resume playback, press / PAIR button on unit or key on remote control again.
2. To stop playback, press STOP button on unit or on remote control, the total number of
tracks will show on the display.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
Press the /+10 or /-10 button on unit or “TUN+/ ”or “TUN-/ ” key on remote
control on stop mode or during playing until the desired track appears on the display. It will start
play automatically.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the
/+10
or
/-10
button on unit or TUN+/ or TUN-/ key on remote
control to scan the current playing track at high speed until desired point (passage) appears,
then release the button for normal playback mode. Playback will start again from this point.
To select a song which track number exceeds 10
（
for MP3 disc only
）
To select a song/track which number exceeds 10, press and hold the /+10 button on unit in
stop mode or press
FOLD./10/M
UP button on the remote control during playback each time to
skip forward 10 tracks in stop mode, then press the /+10 button on unit or TUN+/ key on
remote control to select desired track.
To select a desired folder
（
for MP3 disc that contains more than one folder
）
To select a desired folder during playback, press and hold the FOLD./10/M UP/DOWN button
on the remote control to next/previous folder.
PROGRAMING TRACKS
Programming tracks of disc are possible when playback is stopped. Up to 20 tracks for CD disc
and 99 tracks for MP3 disc can be stored in the memory in any order.
1
．
In stop mode, press the
PROG./P-MODE
button on unit or
P-MODE
key on remote to enter
program setting, the
PROG
logo will flash on the display and show
P01
.
2
．
Press the
/+10
button on unit or TUN+/ on remote control to select the first desired
track to be programmed. (example: track 2)
3
．
Press the
PROG./P-MODE
button on unit or
P-MODE
key on remote to enter. The display
would flash
PROG
and show
P02
.
4
．
Repeat steps 2 & 3 to store other desired tracks until all tracks programmed.