EN-2
EN-1
1
Multi Port Flow Selector Unit (hereafter "Flow Selector unit")
Thank you very much for purchasing TOSHIBA / Carrier Super Heat Recovery Multi (SHRM) Air conditioner.
Please read this manual carefully before using your Flow Selector unit.
• When installing an indoor or outdoor unit, follow the installation manual supplied with the unit.
• To connect the Flow Selector unit to an outdoor unit with pipes, a branching joint or header is required.
Choose one according to the capacity of the units.
ADOPTION OF NEW REFRIGERANT
This Super Heat Recovery Multi Air Conditioner is a new type which adopts a new refrigerant HFC (R410A)
instead of the conventional refrigerant R22 in order to prevent destruction of the ozone layer.
Be sure to use an indoor or outdoor unit in combination with the new refrigerant.
CONTENTS
Accessory parts and Parts to be procured locally
.............................
2
1
PRECAUTIONS FOR SAFETY
................................................
3
2
INSTALLATION OF NEW REFRIGERANT AIR CONDITIONER
..........
4
3
SELECTION OF INSTALLATION PLACE
...................................
4
4
INSTALLATION OF FLOW SELECTOR UNIT
...............................
5
5
DRAIN PIPING
..................................................................
7
6
REFRIGERANT PIPING
........................................................
8
7
ELECTRICAL CONNECTION
................................................
10
01_1118431101-EN.indd 1
01_1118431101-EN.indd 1
7/12/2559 BE 9:53 AM
7/12/2559 BE 9:53 AM