User’s Manual
EN-6
STOR.E CANVIO 3.5" Desktop
Connecting the drive to your
computer
1. Turn off your computer.
2. Plug the AC adaptor’s DC output plug into the DC IN 12V jack of the
drive and the power cord into a live wall outlet.
3. Plug the USB 3.0 Standard-A connector into a USB port of your host
system or an active USB HUB.
4. Now, plug the USB 3.0 Type B connector into the corresponding port of
the drive itself.
5. Boot up your computer.
■
the Power/Data indicator light will illuminate
■
the drive will power up
■
the drive should mount and a new drive icon should appear in
“My Computer”
1. Air Vent
5. USB 3.0 Type B micro connector
2. USB 3.0 port
6. USB 3.0 standard Type A connector
3. DC IN 12V Jack
7. USB 3.0 host port, backward compatible
with USB 2.0
4. DC output plug
7
2
3
4
5
6
1
You may need USB 3.0 Express Card Host Controller for your computer if
the computer doesn’t have USB 3.0 port. You also can connect the device
to USB 2.0 port of your computer, However the transfer rate will be
downgraded to that of USB 2.0.
NOTE
Содержание Canvio Desk 3.5"
Страница 239: ...SC7055 A0 ___ www toshiba eu storage ...