
User’s Manual
EN-17
CANVIO AEROCAST WIRELESS HARD DRIVE
Connect to Canvio AeroCast
You can connect to the Canvio AeroCast Wireless Hard Drive directly with
the included USB cable (Direct-Attached Storage mode) or connect
wirelessly (Wireless LAN mode).
Connect via USB
To operate via USB, connect the Canvio AeroCast Wireless Hard Drive to
the computer’s USB port using the included USB cable.
For Mac users:
To write files via USB, you will need to install the “NTFS driver for Mac” to
your Mac. Refer the pre-loaded manual stored on the Canvio AeroCast
Wireless Hard Drive.
(Sample Illustration) Connect via USB
To connect the Canvio AeroCast to your computer:
1. Make sure the Canvio AeroCast Wireless Hard Drive is powered OFF.
2. Connect the included USB 3.0 cable to the Canvio AeroCast Wireless
Hard Drive.
3. Connect the other end of the USB 3.0 cable to your computer’s USB
port.
You can now begin transferring data to and from the product.
USB 3.0 port
USB port
USB cable