8
(If the wireless LAN access point you are using has the WPS mark
(supports Wi-Fi Protected Setup™)).
1. Tap [Automatic set up (WPS)]
2. Press and hold the wireless LAN access point's WPS button until the
access point's lamp starts to flash
Do it within two minutes after the [WPS Settings] screen appears.
3. Tap [Next]
1. Tap [To settings screen]
2. Tap [Wi-Fi] to check
it
The wireless LAN networks (Wi-Fi networks) that can be used are de-
tected and appear in a list.
3. Tap a wireless LAN network (SSID) to connect to
4. Enter the password and other information required by network secu-
rity.
* See the manuals provided with the broad band router or wireless LAN
access point regarding details about SSIDs and passwords to do the
set up correctly.
5. Tap [Connect]
If the connection is successful, "Connected to XXX" appears below
[Wi-Fi] (XXX is the name set for the wireless LAN network).
6. Tap
on the top left of the screen
The screen returns to step 1.
7. Tap [Next]
For automatic set up (WPS)
For manual set up
TinkerBell_EN_SetupGuide.indd 8
12/12/26 13:34
