53-
EN
TOUCH SCREEN CONTROLLER for Air Conditioning Control System
Owner's Manual
[2-10] Output to USB memory (TOUCH SCREEN CONTROLLER only)
This is used to output alarm data and data for power distribution to a USB memory that is connected.
[2-11] System initialize (TOUCH SCREEN CONTROLLER only)
Restarts and resets the selected machine.
[2-12] Alarm email address setting (TOUCH SCREEN CONTROLLER only)
When abnormalities occur, the name of the air conditioner, the time and date of the abnormalities, and information about the
abnormalities are sent to the email addresses set as recipients.
(1) Connect a USB memory to the USB port.
(2) Tap the [OK] button
<1>
to output the alarm files, and monthly and daily reports to the USB memory.
(3) The [OK] button
<1>
is enabled, when the process is complete, remove the USB memory.
(1) Select the machine
<1>
to reset.
(2) Tap the [OK] button
<2>
to reset the selected machine.
▼
Setting addresses
(1) Enter your email address in [Address]
<1>
. (Maximum of 5 addresses)
(2) Tap the [OK] button
<2>
to apply the settings.
▼
Test transmission
(1) The [Test transmission] button
<3>
is enabled when the addresses are set, so tap it.
* A test email is transmitted to the email address that is set.
<1>
<1>
<1>
<1>
<2>
<2>
<1>
<1>
<2>
<2>
<3>
<3>
