Toshiba B-FP802-CR-QM-S, Руководство пользователя

Страница: 4 / 16

1. Precautions 3
1. Precautions
NOTICE FOR THE CUSTOMERS IN THE UNITED KINGDOM
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362, (i.e.,
marked with or mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change
the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest
Toshiba Tec service representative.
CE Compliance (for EU only)
This product complies with the requirements of EMC Directive including their amendments.
NOTES:
1. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at this own expense.
2. Changes or modification not expressly approved by manufacturer for compliance could void the user’s authority
to operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Note:
When you purchase interface cables on the market, shielded cables must be chosen and used.