8/8
Precautions for Handling of Wireless Communication Devices
Wireless LAN Module: SD-Link 11g (B-EP700-WLAN-QM-R)
Cautions
General
For all countries and areas
This product is a wireless communication device, and the use of thisproduct is restricted to the following countries or
areas. If the product isused in the countries or areas other than the following, you may bepunished according to the laws
of those countries or areas.
USA, Canada, Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,
Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, United Kingdom, Switzerland, Norway, Iceland, Liechtenstein, Australia,
New Zealand, Mexico
For Europe
for wireless LAN
Hereby, TOSHIBA TEC CORPORATION, declares that the SD-Link11g is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. This equipment uses a radio frequency band that has not been
harmonized throughout all EU and EFTA countries, and can be used in EU and EFTA countries.
For USA
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, includinginterference that may cause undesired operation.
Changes or modification not expressly approved by manufacturer forcompliance could void the user’s authority to
operate the equipment.
For Canada
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment that is installed outdoors is subject to licensing.
For safety
Do not use this product in locations where use may be forbidden, for example,in an aeroplane or a hospital. If you do not
know the forbidden areas, please referto and follow the airline company or medical institution guidelines.
Flight instrument or medical equipment may be affected, causing a serious accident.
Since this product uses extremely low power compared with mobile phones, itcannot possibly interfere the pacemakers
and defibrillators. However, if the useof this product should be likely to have affected the pacemaker or
defibrillator,immediately stop using the product and contact your TOSHIBA TEC sales agent.
Do not disassemble, modify, or repair the product. Doing so may cause injury. Also, modification is against the Laws
and Regulations for Radio Equipment. Please ask your TOSHIBA TEC sales agent for repair.
Precaution in use
This product communicates with other devices by radio. Depending on the installation location, orientation, environment,
etc., its communication performance may deteriorate or devices installed near by may be affected.
Keep away from a microwave.
Communication performance may deteriorate or a communication error may occur due to the radio emitted from a
microwave.
Since the Bluetooth and wireless LAN use the same radio frequency band, each radio wave may interfere with each
other when they are used at the same time, causing a deterioration of communication performance or a disconnection of
network. If there is any problem with connection, please stop using either Bluetooth or wireless LAN.
Do not use the product on a metal table or near a metal object.
Communication performance may be deteriorated.
SD-Link 11g Specification
• Built-in IEEE802 Part 11b/g (802.11b/g)
• Operating temperature (When installed to the printer): 0 to 50°C 25% to 85%RH (No condensation)
• Dimensions
:
47.0 mm (W) x 24.0 mm (H) x 4.7 mm (D)
PRINTED IN SINGAPORE
EO2-38062
