manualshive.com logo in svg

Toshiba AWT310 Series, Руководство пользователя

Поделиться
Скачать
Toshiba AWT310 Series Скачать руководство пользователя страница 47

 

 

Power on

Power off
(no operation)

AC adaptor
not
connected

Remaining
battery capacity
is above low
battery trigger
point

• Operates
• LED: off

Remaining
battery capacity
is below low
battery trigger
point

• Operates
• LED: flashes
amber

Remaining
battery capacity
is exhausted

Computer shuts
down

Battery indicator

Check the 

Battery

 indicator to determine the status of the battery pack and

the power status with the AC adaptor connected. The following indicator
conditions should be noted:

Flashing amber

The battery charge is low. The AC adaptor must
be connected in order to recharge the battery.

Amber

Indicates the AC adaptor is connected and the
battery is charging.

White

Indicates the AC adaptor is connected and the
battery is fully charged.

No light

Under any other conditions, the indicator does
not light.

If the battery pack becomes too hot while it is being charged, the charge
will stop and the Battery indicator will go out. When the battery pack's
temperature falls to a normal range, charging will resume - this process will
occur regardless of whether the computer's power is on or off.

Power indicator

Check the 

Power

 indicator to determine the power status of the computer -

the following indicator conditions should be noted:

White

Indicates power is being supplied (either from the
AC adaptor or battery) to the computer and the
computer is turned on.

User's Manual

3-15

Содержание AWT310 Series







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды