6
Cleaning the Battery Contacts
To maintain a good charge, it is important to clean all battery contacts
on the handset and base about once a month. Use a pencil eraser or other
contact cleaner. Do not use any liquids or solvents.
Selecting a Location
Before choosing a location for your new phone, read the Installation
Considerations included in the Precautions and Important Safety
Instructions brochure. Note: Raise the antenna on the base to get best
communication range.
Setting the Dial Mode Switch
Desk or Tabletop Installation
1.Plug the AC adapter cord into the 9V DC input jack on the base.
2.Wrap the AC adapter cord inside the molded strain-relief.
3.Plug one end of the long telephone cord into the TEL LINE jack on the
base.
4.Place the telephone cord into the right molded channel cord holder.
5.Plug the other end of the telephone cord into the telephone wall jack.
(Remember, the phone must be fully charged before you can use it.)
6.Plug the AC adapter into a standard 120V AC wall outlet that is not
controlled by a wall switch.
7.Raise the antenna on the base.
