(2/3)
KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
Button
Function
INPUT
button (on Remote)
Test signal selection
CH
(on Remote)
Selection of the adjustment items
VOL
+/– (on Remote)
Change of the data value
[7] button
Automatic A/D Adjustment
(PC, Component, Composite(PAL, NTSC))
[9] button
Self Check display ON
[Exit] button
Exit from Service mode
Self Check display Off
CAUTION: Never try to perform initialization unless you have changed the memory IC.
TEST SIGNAL SELECTION
1) While displaying the adjustment menu, every pressing of
INPUT
button on the Remote Control changes the
built-in test patterns on screen as described below.
When a pattern is changed at the time of an ATV display, it can display only for a moment.
SELECTING THE ADJUSTING ITEMS
1) While displaying the adjustment menu, press the
CH
button to cycle through the adjustment items in the
order of table. (
CH
button for reverse order)
ADJUSTING THE DATA
1) While displaying the adjustment menu, press the VOL +/– button to change the value of data in the range
from 00H to FFH. The variable range depends on the adjusting item.
EXIT FROM SERVICE MODE
1) Press the [Exit] button on Remote.
Normal
Picture
Red screen
Green screen
Blue screen
Содержание 65L9400U Series
Страница 1: ...SERVICE MANUAL LCD Color Television 65L9400U series System Information FILE NO 050 2014124 ...
Страница 132: ...SERVICE MANUAL LCD Color Television 65L9400U Model Information FILE NO 050 2014125 ...
Страница 136: ...REV 00 Oct 2 2014 TOSHIBA LIFESTYLE PRODUCTS SERVICES CORPORATION 2 9 Suehiro Cho Ome Shi Tokyo 198 8710 Japan ...
Страница 137: ...REV 01 Aug 12 2014 TOSHIBA LIFESTYLE PRODUCTS SERVICES CORPORATION 2 9 Suehiro Cho Ome Shi Tokyo 198 8710 Japan ...