Toshiba 58L9300U Скачать руководство пользователя страница 174

174

Cloud TV Companion 

Apps

Using Apps on a Tablet or Smart phone

Toshiba provides apps for tablets and smart phones. The apps will vary by 

country and availability may change in the future with respect to current 

apps.

 

NOTE

 

Apps will vary by country and availability may change in the future on 

current apps.

These apps are available for compatible Toshiba equipment using 

compatible tablets and smart phones powered by Android™ or iOS. You 

can download these apps through the Google Play™ or the iTunes Store.

In order to use these apps, you must configure the settings through the 

Apps Control Profile.

 

NOTE

 

v

  Third party Internet services are not provided by Toshiba, may change 

or be discontinued at any time, and may be subject to Internet service 

provider restrictions. Toshiba makes no warranties, representations, 

or assurances about the content, availability, or functionality of third-

party content or services. Use of third-party Internet services may 

require the creation of a separate account through a computer with 

Internet access and/or payment of one-time and/or recurring charges 

and membership. Not all third-party services may be available on or 

compatible with this product. In order to experience the full suggested 

capabilities of this product, fully-compatible devices may be required.

Chapter 9

Содержание 58L9300U











































































































































































































Отзывы: