Intr
oduction
Connecting
y
our T
V
Using the
remote contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
24
(E) 46/52/62HMX85
Learning about the remote control
The buttons used for operating the TV only are described here. For a
complete list of the remote control’s functions, see the “Remote
Control functional key chart” on pages 18–19.
POWER
turns the TV on and off.
Note:
If the Quick Restart feature is in OFF mode, it can take up to several seconds for
the picture to appear. See page 28 for details.
SLEEP
programs the TV to turn off at a specific time (page 52)
LIGHT
The first press of the LIGHT button lights the keypad and turns
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds (10 seconds
if you’re in programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0-9, 100)
allow direct access to channels (page 28)
MODE
cycles through the six device modes: TV, CABLE/SAT, VCR,
DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds (page 20).
PIC SIZE
cycles through the five pictures sizes: Natural, TheaterWide 1,
TheaterWide 2, TheaterWide 3, and Full (page 32)
FAVORITE
accesses the favorite channel search function (page 39)
MENU
accesses on-screen menu system (page 25)
ENTER
activates the menu function settings (page 25)
yz
x
•
(arrow buttons) select or adjust programming menus (page 25)
FAV
y
and FAV
z
cycle through channels you programmed as favorite
channels (page 30)
CH
yz
cycles through channels you programmed into the TV’s memory
(page 27)
VOL
yz
adjusts the volume level
EXIT
closes on-screen menus (page 25)
INPUT
selects the video input source (page 50)
MUTE
reduces or turns off the sound (page 54)
RECALL
displays TV status information on-screen (page 59)
CH RTN
returns to the last viewed channel (page 29)
POP CH
y
and POP CH
z
select the POP channels (page 36)
SPLIT
turns the POP feature on and off (page 36)
CH SCAN
accesses the programmed channel search function (page 38)
FREEZE
freezes the picture. Press again to restore the moving picture.
SWAP
switches the main and POP pictures (page 37)
POP DIRECT CH
allows direct access to POP channels (page 36)
SOURCE
selects the POP picture source (page 36)
Note:
The error message “Not Available” will appear
if you press a key for a function that is not
available.
#01E17-24_46/52/62HMX85
5/10/05, 12:39 PM
24
Black
