Toshiba 4400 Series Скачать руководство пользователя страница 3

Страница: 3 / 138

4400 Series Installation and Operation Manual – 64527-008

Product Use and Warranty Restrictions

The Toshiba products listed in this document are intended for usage in general electronics applications (computer, personal

equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These Toshiba products

are neither intended nor warranted for usage in certain applications outlined in Section

1.4

Unintended Usage

NOTICE

PLEASE INFORM TOSHIBA INTERNATIONAL CORPORATION OR AUTHORIZED REPRESENTATIVE IN

CASE OF INCONSISTENCIES, OMISSIONS, OR QUESTIONS.

[email protected]

or visit us at:

www.toshiba.com/tic/industrial/uninterruptible-power-systems

The instructions contained in this manual are not intended to cover all of the details or variations in equipment, or to provide

for every possible contingency concerning installation, operation, or

maintenance. Should further information be required

or if problems arise which are not covered sufficiently, contact your Toshiba sales office or call Toshiba Power Electronics

Division at 855-803-7087

Nothing in this manual shall alter Toshiba International Corporation’s standard terms and conditions or the

conditions of any written sales contract.

Any electrical or mechanical modifications to the equipment discussed herein, without prior written consent of Toshiba

International Corporation, will void all warranties and may void the UL/CUL/CE/ETL listing. Unauthorized modifications can

also result in personal injury, loss of life, or destruction of the equipment.

QUALIFIED PERSONNEL ONLY

Only qualified persons are to install, operate, or service this equipment according to all applicable codes and

established safety practices. The definition of Qualified Personnel is detailed in Section 2.3

Содержание 4400 Series











































































































































Результаты поиска

Содержание 4400 Series

Отзывы:

Похожие инструкции для 4400 Series

Бренды по названию

Популярные бренды

Toshiba 4400 Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 4400 Series

Отзывы:

Похожие инструкции для 4400 Series

Бренды по названию

Популярные бренды