Toshiba 43U5069, Руководство пользователя

Страница: 15 / 29

13
General Operation
Turning the TV on for the First Time
1. Connect the mains cable to the mains socket after you have
completed all the connections.
2. The first time you turn the TV on, it will go straight into the
Installation Guide.
3. Press the
▲
/
▼
/
◄
/
►
or / / / button to
navigate the menu and change the settings. Press the OK
button to confirm.
Language
Select your desired language to be displayed on the menu.
Country
Select the country where you will operate the TV.
Wireless Network
If your TV does not automatically detect an Ethernet connection,
then use a wireless network, select your network from the list that
displays, also you can add a hidden network. When you’re done,
move to the next screen.
End User License Agreement
Your use of this device and all related services is governed by the
End User License Agreement and relative policies. Please review
these documents carefully and make sure that you have read and
agree to the provisions of the End User License Agreement.
Finish Setup Wizard
Press “Start” to use your TV, for retailers press “Store Mode”.
HOME
or > System > Settings > Channel > Auto Scan
Auto Scan
Automatically scan for channels to view programming from your
TV source.
HOME
or > Sy s te m > Se ttings > C ha nne l >
Advanced Settings > Manual Scan
DTV Manual Scan
Manual scan TV programme in digital signals.
When the DTV Manual Scan screen appears, press
◄
/
►
or / button to select Antenna, Cable or Satellite and
then press Start to commence the search of that channel. When
the signal has been tuned, signal strength will be displayed on
the screen.
ATV Manual Scan
Manual scan TV programme in analog signals.
Channel Scan
Channel Edit
HOME
or > System > Settings > Channel > Channel Edit
Manually edit the channel list order to your preference.
Edit the channels
Press
OK
button on the selected channel then a checkbox will
appear. You can select more channels at the same time to move
or delete them.
Delete: Press
►
or button to delete the selected channel.
Restore: Press [RED] button to enter the list of deleted channels.
Press
◄
or button to restore the deleted channel.
Move: Press
◄
or button to move the selected channel.
NOTE
Moving the channels could be restricted by the operator. If you
want to be able to move channels, we recommend not choosing
an operator during channel scan and LCN should be set to Off.
Filter