background image

5

Introduction

4) Never stand or climb on the TV.

Be especially careful in households with children to 
prevent them through climbing on top of the TV.
It may move, fall over, break, become damaged or 
cause an injury.

5) When the TV will not be used for a long period of 

time, such as during vacation or travel, remove the 
power plug from the wall outlet for safety.

• The TV is not completely disconnected from the 

power supply line, as minute current is consumed 
even when the 

!

 Power switch is turned off.

• The Mains plug or an appliance coupler is used as the 

disconnect device, therefore the disconnect device 
shall remain readily operable.

6) Never pull on the power cord when removing the 

plug from the wall outlet.

Always hold the plug firmly when removing it. If the 
power cord is yanked, the cord may become damaged 
and a fire or an electric shock may occur.

7) Never cut, break, modify, twist, bunch up or bent the 

cord or apply excessive force or tension to it.

Never place heavy objects on the cord or allow it to 
overheat as this may cause damage, a fire or an electric 
shock. Contact a service technician if the power cord is 
damaged.

8) If there is thunder or lightning, never touch the 

antenna cable or other connected cables.

You may suffer an electric shock.

Service

1) Never repair, modify or disassemble the TV by 

yourself.

It may cause a fire or an electric shock. Consult a 
service technician for inspection and repairs.

2) When a malfunction occurs, or if smoke or an 

unusual odor comes from the TV, turn off the TV 
and remove the power plug from the outlet 
immediately.

Make sure that the smoke or smell has stopped, then 
contact a service technician. If the TV is still used in this 
condition, it may cause a fire or an electric shock.

3) If the TV is dropped or the cabinet is broken, turn off 

the TV and remove the power plug from the outlet 
immediately.

If the TV is still power used in this condition, it may 
cause a fire or an electric shock. If the cabinet is broken, 
be careful when handling the TV to prevent an injury. 
Contact a service technician for inspection and repair.

Содержание 42WL68A

































Отзывы: