– 21 –
1. SCREEN ADJUSTMENT
The adjustment is carried out on four screens; Wide, S.Live,
Cinema, S.title in both PAL and NTSC modes. When making
the adjustments, feed an external signal to make an
synchronization.
Note:
The convergence circuit is a circuit to eliminate screen distortion
and can not make a drastic correction such as to correct entire
screen size. An excessive correction may actuate the protection
circuit. So a care will be necessary.
1-1. Entering the Adjustment Menu
CONVERGENCE ADJUSTMENT
Before proceeding to the adjustment for each screen, always
perform the adjustments for vertical size (HIT) and horizontal
size (WID) with the main deflection data changed.
The menu order is 1~7 .... when the vertical sync is 50 Hz.
(In this case, item 8~12 are not displayed)
The menu order is 8~12 .... when the vertical sync is 60 Hz.
(In this case, item 1~7 are not displayed)
7 key
7 key
CONVER ADJUST MENU
1 Adjust PAL wide
2 PAL Wide to Others
3 Adjust PAL S.Live
4 Adjust PAL Cinema
5 Adjust PAL S.title
6 PAL to NTSC(Wide)
7 PAL to NTSC(ALL)
8 Adjust NTSC Wide
9 NTSC Wide to Others
10 Adjust NTSC S.Live
11 Adjust NTSC Cinema
12 Adjust NTSC S.title
Fig. 1
GENERAL ADJUSTMENTS