En
glis
h
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved.
Using the remote control
5
Installing the remote control
batteries
. Remove the battery cover from the back of the remote
control.
. Insert two "AA" size batteries, making sure to match the
+ and – signs on the batteries with the + and – symbols
inside the battery compartment.
. Reinsert the battery cover on the back of the remote
control until the tab snaps.
Caution:
Never throw batteries into a fire.
Note:
• Be sure to use "AA" size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the environment in mind.
Always dispose of batteries in accordance with applicable laws and
regulations.
• If the remote control does not operate correctly, or if the operating
range becomes reduced, replace batteries with new ones.
• When necessary to replace batteries in the remote control, always
replace both batteries with new ones. Never mix battery types or use
and and used batteries in combination.
• Always remove the batteries from the remote control if they are dead
or if the remote control is not to be used for an extended period of time.
This will prevent acid from leaking into the battery compartment.
Remote control effective range
The effective range of the remote control's IR (infrared)
sensor is illustrated at right.
For optimum performance, aim the remote control directly
at the TV's IR sensor, and make sure there are no
obstructions between the remote control and the TV.
Note:
Avoid placing the remote control's IR sensor in bright light, which
may reduce its receiving sensitivity.
16.4 ft (5m)
