Toshiba 39L22U, Руководство пользователя

Страница: 81 / 131

81
Using the TV’s features
Adjusting the audio
Selecting the optical audio output format
You can select the optical audio output format when you connect a
Dolby
®
Digital decoder or other digital audio systems to the TV’s
Optical Audio Out terminal (see “Connecting a digital audio
system” on page 30 ).
To select the optical audio output format:
1 Press the MENU button, and then open the Sound menu.
2 Highlight Audio Setup , and then press the ENTER button.
3 In the Dolby Digital Output Format field, select either Dolby
Digital or PCM , depending on your device.
4 To save the new settings, highlight Done , and then press the
ENTER button.
To reset the settings to the factory defaults, highlight Reset ,
and then press the ENTER button.
Using the Dolby
®
Digital Dynamic Range Control feature
You can further compress Dolby
®
Digital dynamic range, allowing
you to switch from digital to analog broadcasts at the same dynamic
range.
To use the Dolby
®
Digital Dynamic Range Control:
1 Press the MENU button, and then open the Sound menu.
2 Highlight Audio Setup , and then press the ENTER button.
3 In the Dolby Digital Dynamic Range Control field, select
either Compressed or Standard . When Standard is selected,
the audio outputs with minimal compression.
4 To save the new settings, highlight Done , and then press the
ENTER button.
To reset the settings to the factory defaults, highlight Reset ,
and then press the ENTER button.
❖
This feature is available when the TV is tuned to a digital RF
channel with the Dolby
®
Digital signal.
❖
The Dolby
®
Digital Dynamic Range Control will function in
relation to Optical Output Format (PCM mode).
NOTE