Toshiba 37X3000A, Руководство пользователя

Страница: 20 / 44

20
Using the TV’s features (General)
Adjusting the basic picture quality
1
In Digital TV, press
, M
then press or to display the
TV set up
then press
Q
.
2
Press or to display the PICTURE menu.
3
In Analog TV, press
M
and or to display the
PICTURE menu.
4
Press or to select the Picture settings menu, then
press
Q
.
5
Press or to select an item you want to adjust, then
press or to adjust the settings as required.
Notes:
• The Tint may only be adjusted on NTSC signal.
• In the PC input mode (
-
page 25), Color , Tint and
Sharpness modes are not available.
Activating the black stretch
This function increases the strength of dark areas of the picture
which improves definition.
1
From the Picture settings menu, press or to
select
Black stretch
on the 2nd page.
2
Press or to select On or Off .
Note:
In the PC input mode (
-
page 25), this mode is not available.
Activating the MPEG NR (Noise Reduction)
If the receiving signal of MPEG is a mosquito (grained) noise
depending on the compression and conversion, the noise may
be reduced when using this function.
1
From the
Picture settings
menu, press or to
select MPEG NR on the 2nd page.
2
Press or to select Off , Low , Middle or High .
Note:
In the PC input mode (
-
page 25), this mode is not available.
Activating the DNR (Digital Noise
Reduction)
- analog only -
If the receiving signal is weak and the picture is blurry, the
picture may be improved when using this function.
1
From the Picture settings menu, press or to
select
DNR
on the 2nd page.
2
Press or to select Auto , Off , Low , Middle or High .
Selecting the color temperature
You can change the tone of the picture by selecting from three
preset color temperatures:
Cool , Normal or Warm .
1
From the
Picture settings
menu, press or to
select Color Temperature on the 2nd page.
2
Press or to select mode you prefer.
Cool : Lends a blue hue to the picture.
Normal : Neutral
Warm : Lends a red hue to the picture.
Adjusting the color management
You can adjust the picture color quality by selecting from 6
base color adjustments :
Red , Green , Blue , Yellow ,
Magenta
or
Cyan
.
1
Press
M
, then press or to display the PICTURE
menu.
2
Press or to select 3D Color management , then
press or to select
On
.
3
Press or to select
Base color adjustment
.
4
Press
Q
, then press or to select an item you want
to adjust.
Selection
Pressing
Back light darker brighter
Contrast lower higher
Brightness darker brighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
PICTURE
MENU Ba c k Wat c h TV EXIT
OK Picture settings
Off
Base color adjustment
3D Color management
Active Backlight Control On
Cinema mode On
Tint
Color
Ba c k light
MENU Ba c k Wat c h TV EXIT
100
50
0
0 Sharpness
Contrast 100
Pi c ture settings 1/2
Brightness
50
Contrast 100
Color Temperature
Bla c k stret c h
MENU
Ba c k Wat c h TV
EXIT
On
Cool
MPEG NR Low
Pi c ture settings 2/2
DNR Auto
Black stretch On
MPEG NR
High
DNR Auto
Color Temperature Cool
3D Color management
On
Hue
MENU Ba c k Wat c h TV EXIT
Red
Blue
Green
Yellow
Magenta
Cyan
Saturation Brightness
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Reset OK
Base c olor adjustment