Toshiba 37WL68P, Руководство по обслуживанию

Страница: 123 / 191

Progress status is "WRITING".
6) Progress status is changed "OK" and power cycle (automatically). Then QA02
initialization has been completed.
7) Enter the service mode and select version check mode. Confirm if model name and
model id set is correct. If not, repeat steps 1) to 6).
Note:
In case initialization by setting wrong MODEL ID is done, there is a possibility of
abnormal display.
8) Set I2C check function of TVOP to enable.
9) Check the picture carefully. If necessary, adjust any adjustment item above.
Perform "Auto tune" on the owner

fs manual.
MODEL ID (HEX)
Europe
Model name Panel vender
0x01 32WLT68 AUO
0x02 37WLT68 AUO
0x03 42WLT68 AUO
0x04 32WL68P AUO
0x05 37WL68P AUO
0x06
0x07
0x08
0x09
0x10
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
Page 8 of 18
2013-12-02 file://\\serwer\instr\CD\1000-1099\CD1031\37WL68P-01\37WL68P-01\html\!adj-sm...