197
If Something Goes Wrong
Problems when you turn on the computer
The computer starts but, when you press a key on the
keyboard or touch the AccuPoint II, nothing happens.
To clear the condition, press
Ctrl
,
Alt
, and
Del
simultaneously, or
press the reset button.
Clearing the condition may get the computer running, but it won’t
solve a resource conflict. Read the documentation that came with
the conflicting device and
“Resolving a hardware conflict” on
You press the power button and hear the system start, but
Windows NT does not load correctly.
There is a problem starting Windows NT from your hard disk.
1
Start the computer from the hard drive and select
Windows
NT Workstation 4.0
, then press
Enter
.
2
When prompted to press the spacebar, press the spacebar to
invoke the Hardware Profile/Last Known Good Menu.
3
Press
L
to switch to the last known good configuration, then
press
Enter
.
The computer is not accessing the hard disk or the diskette
drive.
Your computer normally loads Windows from the hard disk. If
you have a hard disk problem, you will not be able to start the
computer. Insert a system diskette into the external USB diskette
drive and press
F10
while you turn on the power.
The computer displays the
WARNING RESUME FAILURE
message.
The computer was placed in Standby mode and the main battery
has discharged. Data stored in the computer’s memory has been
lost.
To charge the main battery, leave the computer plugged into a live
wall outlet for about seven hours. For more information, see
Содержание 3490CT - Portege - PIII 700 MHz
