background image

4

Introduction

7) Never place the TV next to a stove where it will be 

exposed to oil, smoke, or steam, or in a location 
where there is a large quantity of dust.

This may cause a fire or an electric shock.

8) Install the TV in a horizontal, stable location. 

Connect between two clips on the back of the TV 
and a wall, pillar, etc., with a sturdy tie and clip of 
supplied accessories (

-

 page 30).

• Use as short a tie as possible to ensure the TV is 

stable.

• If the TV is not installed securely, it may lean or fall 

over and cause an injury.

• To prevent injury, use the exclusive optional stand or 

wall-hanging bracket to install this TV on the floor or 
wall securely in accordance with a qualified 
technician.

9) Precautions for moving the TV

• When moving the TV, be sure to remove the plug 

from the wall outlet and disconnect the antenna cable 
and audio/video cables, any steady ties. A fire or an 
electric shock may result if the power cord is 
damaged.

• When carrying the TV, at least two people are 

needed. Be sure to carry it upright.

• Never carry the TV with the screen facing up or down.

10) Precautions for installing on outdoor antenna

An outside antenna system should not be located in the 
vicinity of overhead power lines, or other electric light or 
power circuits.
If the antenna falls down or drops, it may cause an injury 
or an electric shock.

Use

1) Never place hot objects or open flame sources, 

such as lighted candles or nightlights, on or close 
to the TV.

High temperatures can melt plastic and lead to fires.

2) The apparatus shall not be exposed to dripping or 

splashing and that no objects filled with liquids, 
such as vases, shall be placed on the apparatus.

When liquids are spilled or small items are dropped 
inside the TV, this may cause a fire or an electric shock. 
If small objects drop inside the TV, turn off the TV and 
remove the power plug from the outlet immediately and 
contact a service technician.

3) Never insert objects (metal or paper) or pour water 

inside the TV through ventilation holes and other 
openings.

These items may cause a fire or an electric shock.
If these objects are inserted inside the TV, turn off the 
TV and remove the power plug from the outlet 
immediately and contact a service technician. Be 
especially careful that children do not insert objects in 
the TV.

T

Sturdy tie
(as short as possible)

Clip

Clip

Clip

Side view

op view

Clip

Содержание 32WL68A

































Отзывы: