background image

3

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like any
electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read
the points below for your own safety. They are of a general nature, intended to help with all electronic
consumer products and some points may not apply to the goods you have just purchased.

DO NOT

obstruct the ventilation openings of the

equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.

DO NOT

allow electrical equipment to be exposed

to dripping or splashing or objects filled with liquids,
such as vases, to be placed on the equipment.

DO NOT

place hot objects or naked flame sources,

such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.

DO NOT

use makeshift stands and NEVER fix legs

with wood screws. To ensure complete safety,
always fit the manufacturers’ approved stand,
bracket or legs with the fixings provided according
to the instructions.

DO NOT

listen to headphones at high volume, as

such use can permanently damage your hearing.

DO NOT

leave equipment switched on when it is

unattended, unless it is specifically stated that it is
designed for unattended operation or has a
standby mode. Switch off by withdrawing the plug,
make sure your family know how to do this. Special
arrangements may need to be made for people
with disabilities.

DO NOT

continue to operate the equipment if you

are in any doubt about it working normally, or it is
damaged in any way – switch off, withdraw the
mains plug and consult your dealer.

ABOVE ALL

– 

NEVER let anyone, especially

children, push or hit the screen, push 
anything into holes, slots or any other
openings in the case.

NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.

Leave at least 10cm clearance around the television
to allow adequate ventilation. This will prevent
overheating and possible damage to the television.
Dusty places should also be avoided.

Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between
5°C (41°F) min. and 35°C (94°F) max.

The mains supply required for this equipment is
220-240v AC 50/60Hz. Never connect to a DC
supply or any other power source. DO ensure that
the television is not standing on the mains lead.
DO NOT cut off the mains plug from this
equipment, this incorporates a special Radio
Interference Filter, the removal of which will impair
its performance. In the UK, the fuse fitted in this
plug is approved by ASTA or BSI to 

BS1362

. It

should only be replaced by a correctly rated and
approved type and the fuse cover must be refitted. 
IF IN DOUBT PLEASE CONSULT A COMPETENT
ELECTRICIAN.

DO

read the operating instructions before you

attempt to use the equipment.

DO

ensure that all electrical connections 

(including the mains plug, extension leads and
inter-connections between pieces of equipment) 
are properly made and in accordance with the
manufacturers’ instructions. Switch off and
withdraw the mains plug before making or
changing connections.

DO

consult your dealer if you are ever in doubt

about the installation, operation or safety of your
equipment.

DO

be careful with glass panels or doors on

equipment.

Air Circulation

Do not

Heat Damage

Mains Supply

Do

DO NOT REMOVE ANY FIXED COVERS AS THIS
WILL EXPOSE DANGEROUS AND 'LIVE' PARTS.

THE MAINS PLUG IS USED AS A
DISCONNECTING DEVICE AND THEREFORE
SHOULD BE READILY OPERABLE.

g

g

Содержание 32WL66









































Отзывы: