English
- 4 -
Connections
Antenna
Connect the antenna cable/s to your TV.
satellite
dish
aerial /
cable TV
External Devices
Use the proper cable to connect two units together.
Example
Connections
To select the desired input source, press the
Source
button on the remote control. Or press the switch in
consecutively until the
Sources list
is displayed.
PLEASE ENSURE BOTH UNITS ARE
SWITCHED OFF BEFORE CONNECTING
Power
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.
The TV set is designed to operate on a 220-240V
AC, 50 Hz supply.
TV Control & Operation
The control switch allows you to control basic functions
of your TV. Press the centre of the control switch in or
the
Standby
button on the remote to turn the TV on
from standby mode.
First Time Installation
When turned on for the first time, Welcome Screen will be displayed. Select your language and press
OK
.
Follow the on screen instructions to set your TV and install channels. The installation wizard will guide you
through the setup process. You can perform
First Time Installation
anytime using the related option in the
Installation
menu.
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired
or wireless connection.
Wired
modem/router
Wireless
wireless
modem/router
No
te:
The figures are for representation only
