77
Using the TV’s features
Adjusting the audio
2
Highlight
Digital Audio Selector
, and then press the
ENTER
button.
(Sample Image) Sound menu - Digital Audio Selector selection
3
Press the
(
/ arrow) buttons to select
Audio
, and then press
the ( / arrow) buttons to select the desired service.
4
Press the
EXIT
button.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to output
high-fidelity stereo sound. MTS also can transmit a second audio
program (SAP) containing a second language, music or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the “Stereo” mark
and/or word “SAP” appears when the INFO button is pressed. The
MTS feature is only available for analog signals on the
ANT/CABLE input.
To listen in stereo sound:
1
Press the
MENU
button and open the
Sound
menu.
2
Highlight
Audio Setup
, and then press the
ENTER
button.
3
In the
MTS
field, select
Stereo
.
4
To save the new settings, highlight
Done
, and then press the
ENTER
button.
To reset the settings to the factory defaults, highlight
Reset
,
and then press the
ENTER
button.
❖
You can typically leave the TV in Stereo mode because it outputs
the type of sound being broadcast (stereo or monaural).
❖
If the sound is noisy, select Mono to reduce the noise.
NOTE
