53
Setting up your TV
Viewing the system status
Resetting Factory Defaults
To reset all settings and channels to their factory default values:
1
Press the
MENU
button to open the
Setup
menu.
2
Highlight
Installation
, and then press the
ENTER
button.
A new set of Installation menu icons appears.
3
Open the
System Status
menu, highlight
System
Information
, and then press the
ENTER
button.
4
Press the ( / arrow) buttons to scroll through the menu bar
to select
Factory Defaults
.
5
Highlight
Yes
, and then press the
ENTER
button.
6
If a PIN code has been set, enter your PIN code.
7
Press the ( / arrow) buttons to select
Done
, and then press
the
ENTER
button.
A warning message appears.
8
Select
Yes
, and then press the
ENTER
button.
The TV turns off automatically after a few seconds.
9
After the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset process, select
No
, and press the
ENTER
button
in
above.
