Toshiba 28ZH46P, Руководство по обслуживанию

Страница: 9 / 54

- 9 -
DESIGN MODE
1. ENTERING TO DESIGN MODE
ITEM
DATA
S D
Press
(Design mode) (Adjustment mode)
Press
3) Press MENU button on TV set.
2) While pressing (or CALL) button on
Remote and press MENU button on TV.
1) Select the Service mode.
2. SELECTING THE ADJUSTING ITEMS
Every pressing of CHANNEL button in the design mode changes the adjustment items in the order of table-3.
( button for reverse order)
Refer to bus data table for data of design mode.
(See SETTING & ADJUSTING DATA on page 13)
3. ADJUSTING THE DATA
Pressing of VOLUME or ( –/+) button will change the value of the data.
When QA01 is initialized, items “OPT0” and “OPT1” of DESIGN MODE are set to the data of the representative model of this
chassis family.
Therefore, because ON-SCREEN specification remains in the state of the representative of model. This model is required to
reset the data of items “OPT0” and “OPT1”.