C-3
26HF84A
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
The unit will now have the correct DATA for the new MEMORY IC.
Enter DATA SET mode by setting VOLUME to minimum.
Press both VOL. DOWN button on the set and Channel button (6) on the remote control for more than 2 seconds.
ADDRESS and DATA should appear as FIG 1.
ADDRESS is now selected and should "blink". Using the UP/DOWN button on the remote, step through the ADDRESS until
required ADDRESS to be changed is reached.
Press RIGHT/LEFT button to select DATA. When DATA is selected, it will "blink".
Again, step through the DATA using UP/DOWN button until required DATA value has been selected.
Pressing RIGHT/LEFT button will take you back to ADDRESS for further selection if necessary.
Repeat steps 3 to 6 until all data has been checked.
When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input.
After the data input, set to the initializing of shipping.
Turn POWER on.
Press both VOL. DOWN button on the set and Channel button (1) on the remote control for more than 2 seconds.
After the finishing of the initializing of shipping, the unit will turn off automatically.
WHEN REPLACING EEPROM (MEMORY) IC
Содержание 26HF84A
Страница 1: ...SERVICE MANUAL COLOR TELEVISION 26HF84A FILE NO 050 200422 ...
Страница 47: ...124 125 122 123 127 128 129 130 TM101 123 MECHANICAL EXPLODED VIEW PACKING DIAGRAM I 3 26HF84A FOR USA ...
Страница 48: ...124 125 122 123 127 129 130 TM101 123 MECHANICAL EXPLODED VIEW PACKING DIAGRAM I 4 26HF84A FOR CANADA ...
Страница 69: ...TOSHIBA CORPORATION 1 1 SHIBAURA 1 CHOME MINATO KU TOKYO 105 8001 JAPAN ...