English
- 8 -
English
Connecting an HDMI
®
or DVI Device to the HDMI Input
The HDMI inputs on your TV receive digital audio and
uncompressed digital video from an HDMI source device
or uncompressed digital video from a DVI (Digital Visual
Interface) source device.
These inputs are designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital form
from EIA/CEA-861-D–compliant [1] consumer electronic
devices (such as a set-top box or DVD player with HDMI
or DVI output).
NOTE:
•
Some early HDMI equipment may not work properly with
your latest HDMI TV.
•
Supported Audio format: Linear PCM, sampling rate
32/44.1/48kHz.
To Connect an HDMI Device
Connect an HDMI cable (type A connector) to the HDMI ter-
minal. For proper operation, it is recommended that you use
an HDMI cable with the HDMI Logo (
).
•
If your HDMI connection is capable of 1080p and/or
your TV is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this mode.
•
HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
•
To view the HDMI device video, press the
“SOURCE -
”
button to select the appropriate HDMI input.
HDMI Input
Socket
(Back)
HDMI device
D
I
H
M
1
D
I
H
M
2
* Number of
these inputs
may change
according to
the model of
your TV.
To Connect a DVI Device
Connect an HDMI-to-DVI cable (HDMI type A connector) to
the HDMI input socket and audio cables to the AUDIO inputs
(side)(see illustration).
•
The maximum recommended HDMI-to-DVI cable length
is 6.6 ft (2m).
•
An HDMI-to-DVI cable transfers video only. Separate
analogue audio cables are required.
D
I
H
M
1
D
I
H
M
2
HDMI Input
Sockets
HDMI to DVI Cable
(not supplied)
Audio Cable
(not supplied)
Audio Inputs (side)
Audio Transfer
Video Transfer
* Number of
these inputs
may change
according to
the model of
your TV.
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
•
When turning on your electronic components, turn on the
TV first, and then the HDMI or DVI device.
•
When turning off your electronic components, turn off the
HDMI or DVI device first, and then the TV.
