Rev.1. 0
D4161564A
4. Optional parts
(1)
Power cable
Model name: CPRC5260D-**
(2)
Camera mounting kit
Model name: CPT8420
(3)
Camera adapter
Model name: CA5260
Notes on optional parts and compliance with safety standard conditions:
We assure the compliance of this camera with the safety standard when it is used in combination with the
optional parts listed above.
If you use the camera in combination with parts other than specified by our company, you are responsible
for finally confirming the compliance with the safety standard by using the entire machine/equipment.
5. Name of Each Parts
①
WB
Just with one push of this button, the camera will adjust its white-balance when a subject’scolor temperature shifts. AWB is performed
during WB button push, and held (=HOLD) when the button is released.
②
GAIN
This is the fixed GAIN selection switch.(Enabled only under ALC OFF)
③
ALC
This is the ALC(Automatic Light Control) selection switch. With ALC ON, the camera can capture optimal images despite the changes
in the ambient lighting condition, or high-illumination subjects.
④
VIDEO OUT
This is the output connector for composite video signals. Connect this with the video monitor.
⑤
DC IN
This is the connector for power supply, video output, and adjustment signals. Connect this with the power supplier or the video monitor.
Compatible connector
―
HR10A-10P-12S (Manufactured by HIROSE ELECTRIC)
Table 1 :
Pin Assignment
Pin number
Signal name
1
GND
2
+12V
3
GND
4
VIDEO OUT
5
GND
6
SI (Adjustment signal)
7
PC(Adjustment signal)
8
C.OUT
9
SO(Adjustment signal)
10
Y.OUT
11
+12V
12
GND
VIDEO OUT
DC IN
WB
GAIN
ALC
0dB 6dB12dB OFF
ON
①
④
③
⑤
②
Содержание CS5270B
Страница 16: ...Rev 1 0 D4161564A 11 Outline Drawing ...
