Toshiba teli CS3950D, Спецификация

Страница: 4 / 23

iii
D4133738B
Avoid
Do NOT place any potentially-hazardous things on this device.
Do NOT place any things on the device which may, if it gets into the inside of the
body, damage the inner parts of the device (such as a flower pot, glass, cosmetics, a
container filled with liquids or chemicals, as well as small metal parts, etc.). If
tumbled, the liquids inside the bottle, etc. may get into the chassis, causing a fire or an
electric shock accident.
Avoid
Do NOT damage the power cord.
Do NOT damage, break, re-process, nor bend forcefully the power cord. Pulling
forcefully/Twisting/Placing a heavy object on/Applying heat on the cord should also
be avoided. Otherwise, the cord may be damaged, causing a fire or an electric shock
accident. If the cord is damaged, contact us or our dealer/distributor from which you
purchased this device for repair service.
Unplug
Unplug the power-plug when the your device is not in use.
For safety, make sure to unplug the power-plug before you give your device a
cleanup, or when it is not used. Keeping the power-cord connected might invite a fire
or an electric shock hazard.
Avoid
Do NOT expose your device to direct sunlight, nor intensive heat.
Do NOT place this device where it is exposed to direct sunlight, or in a high
temperature condition. To do so may cause the inner temperature of the device to go
up, resulting in burning-down of inner parts, circuits or a fire accident.
Avoid
Do NOT connect/disconnect connectors before turning power off.
Make sure to check the camera power is OFF before connecting/disconnecting
connectors. Otherwise, you might get an electric shock, or your camera might break
down.
Avoid
Do NOT attempt to make connection before turning power off
Make sure to check the camera power is OFF before connection. Otherwise, you
might get an electric shock.
Avoid
Do NOT pull the cord itself
When disconnecting the power-plug out of the outlet, make sure to hold the plug,
and then pull it out. Do NEVER try to pull the cord itself. Otherwise, the cord may
be damaged or broken, leading to a fire or an electric shock accident.
Avoid
Do NOT place your device too close to a heater.
Do NOT place your device or its power cord too close to any heating appliance.
Otherwise, the coating of its switch and/or power-cord may melt, leading to a fire or
an electric shock accident.
Avoid
Do NOT use chemical solvent for cleanup.
When giving your camera a cleanup, avoid using a benzene, alcohol, and thinner.
These chemicals might cause its coating or markings to come off or become
degraded.
Avoid
Do NOT handle the power cord with your hand in an wet condition.
Do NOT plug in/out the power cord with an wet hand. Otherwise, it may cause an
electric shock accident.
CAUTION
DANGER